Monitor specific INFINITI parameters in real-time, including engine and automatic transmission advanced sensor data by adding this plugin to Torque Pro.
Advanced LT is a plugin for Torque Pro, extending the PID/Sensor list with specific parameters from INFINITI vehicles, allowing you to try the plugin with limited sensors before buying. This version does not include calculated sensors like Injector Duty Cycle (%).
*PLEASE NOTE* that other INFINITI models/engines may be supported, but the plugin was tested only on the following models/engines equipped with DiagOnCan (CANBUS ONLY):
* EX25 2.5 V6 (J50 VQ25HR)
* EX35 3.5 V6 (J50 VQ35HR)
* EX37 3.7 V6 (J50 VQ37HR)
* FX35 3.5 V6 (S50 VQ35DE)
* G25 2.5 V6 (V36 VQ25HR)
* G35 3.5 V6 (V36 VQ35HR)
* G37 3.7 V6 (V36 VQ37HR)
* M35 3.5 V6 (Y50 VQ35DE)
* M25 2.5 V6 (Y51 VQ25HR)
* M35 3.5 V6 (Y51 VQ35HR)
For more information about INFINITI engines, visit http://en.wikipedia.org/wiki/List_of_Nissan_engines
Advanced LT requires the latest version of Torque Pro installed in order to function. This is *NOT* a standalone application and will *NOT* work without Torque Pro.
Plugin Installation
-------------------------
1) After downloading the plugin on Google Play, make sure that you see the plugin listed on your Android device installed applications list.
2) Launch Torque Pro and click on the "Advanced LT" icon
3) Select the appropriate engine type and return to Torque Pro main screen
4) Go to Torque Pro "Settings"
5) Make sure that you can see the plugin listed also on Torque Pro by clicking "Settings" > "Plugins"> "Installed Plugins".
6) Scroll down to "Manage extra PIDs/Sensors"
7) Usually this screen will not display any entries, unless you have added any pre-defined or custom PIDs in the past.
8) From the menu, choose "Add predefined set"
9) You may see predefined sets for other INFINITI engine types, so make sure you pick the right one.
10) After clicking on the entry from the previous step, you should see additional entries on the Extra PIDs/Sensors list.
Adding Displays
------------------------
1) After adding the additional sensors, go to the Realtime Information/Dashboard.
2) Press the menu key and then click on "Add Display"
3) Select the appropriate display type (Dial, Bar, Graph, Digital Display, etc)
4) Select the appropriate sensor from the list. Sensors provided by Advanced LT begins with "[IADV]" and should be listed right after the time sensors in the top of the list.
More features/parameters will be added in further releases. If you have comments and/or suggestions please just let me know.
ตรวจสอบพารามิเตอร์ INFINITI เฉพาะในเวลาจริงรวมทั้งเครื่องยนต์และการส่งผ่านข้อมูลเซ็นเซอร์อัตโนมัติขั้นสูงโดยการเพิ่มปลั๊กอินนี้ให้แรงบิด Pro
ขั้นสูง LT เป็นปลั๊กอินกับแรงบิดมืออาชีพขยายรายการ PID / เซนเซอร์กับพารามิเตอร์ที่เฉพาะเจาะจงจากยานพาหนะ INFINITI ช่วยให้คุณลองปลั๊กอินด้วยเซ็นเซอร์ที่ จำกัด ก่อนที่จะซื้อ รุ่นนี้ไม่รวมถึงการเซ็นเซอร์คำนวณเหมือนเป็นวงจรการทำงานหัวฉีด (%)
* หมายเหตุ * ที่อื่น ๆ INFINITI รุ่น / เครื่องยนต์อาจจะได้รับการสนับสนุน แต่ปลั๊กอินถูกทดสอบเฉพาะในรุ่นต่อไปนี้ / เครื่องมืออุปกรณ์ที่มี DiagOnCan (CANbus เท่านั้น):
* EX25 2.5 V6 (J50 VQ25HR)
* EX35 3.5 V6 (J50 VQ35HR)
* EX37 3.7 V6 (J50 VQ37HR)
* FX35 3.5 V6 (S50 VQ35DE)
* G25 2.5 V6 (V36 VQ25HR)
* G35 3.5 V6 (V36 VQ35HR)
* G37 3.7 V6 (V36 VQ37HR)
* M35 3.5 V6 (Y50 VQ35DE)
* M25 2.5 V6 (Y51 VQ25HR)
* M35 3.5 V6 (Y51 VQ35HR)
สำหรับข้อมูลเพิ่มเติมเกี่ยวกับเครื่องมือ INFINITI เยี่ยมชม http://en.wikipedia.org/wiki/List_of_Nissan_engines
ขั้นสูง LT ต้องใช้รุ่นล่าสุดของแรงบิดโปรที่ติดตั้งเพื่อให้สามารถทำงาน นี่คือ * ไม่ * โปรแกรมเดี่ยวและ * ไม่ * จะทำงานได้โดยไม่ต้องแรงบิด Pro
การติดตั้งปลั๊กอิน
-------------------------
1) หลังจากดาวน์โหลดปลั๊กอินบน Google Play ให้แน่ใจว่าคุณเห็นปลั๊กอินที่ระบุไว้บนอุปกรณ์ของคุณในรายการโปรแกรมที่ติดตั้ง
2) เปิดตัวแรงบิด Pro และคลิกที่ "ขั้นสูง LT" ไอคอน
3) เลือกประเภทของเครื่องมือที่เหมาะสมและแรงบิดกลับไปหน้าจอหลักโปร
4) ไปที่แรงบิด Pro "ตั้งค่า"
5) การตรวจสอบให้แน่ใจว่าคุณสามารถเห็นปลั๊กอินที่ระบุไว้บนแรงบิด Pro โดยคลิกที่ "ตั้งค่า"> "ปลั๊กอิน"> "ปลั๊กอินที่ติดตั้ง"
6) เลื่อนลงไป "จัดการ PIDs เสริม / เซนเซอร์"
7) โดยปกติแล้วหน้าจอนี้จะไม่แสดงรายการใด ๆ จนกว่าคุณจะได้เพิ่ม PIDs ที่กำหนดไว้ล่วงหน้าหรือที่กำหนดเองในอดีตที่ผ่านมา
8) จากเมนูให้เลือก "เพิ่มชุดที่กำหนดไว้ล่วงหน้า"
9) คุณอาจจะเห็นชุดที่กำหนดไว้ล่วงหน้าสำหรับชนิดอื่น ๆ INFINITI เครื่องยนต์เพื่อให้แน่ใจว่าคุณเลือกหนึ่งที่เหมาะสม
10) หลังจากคลิกที่รายการจากขั้นตอนก่อนหน้านี้คุณจะเห็นรายการเพิ่มเติมเกี่ยวกับรายการพิเศษ PIDs / เซ็นเซอร์
การเพิ่มการแสดงผล
------------------------
1) หลังจากเพิ่มเซ็นเซอร์เพิ่มเติมให้ไปที่ข้อมูล Realtime / แผงควบคุม
2) กดปุ่มเมนูและจากนั้นคลิกที่ "เพิ่ม" แสดง
3) เลือกประเภทการแสดงผลที่เหมาะสม (โทร, บาร์, กราฟ, ดิจิตอลแสดง ฯลฯ )
4) เลือกเซ็นเซอร์ที่เหมาะสมจากรายการ เซ็นเซอร์โดยขั้นสูง LT เริ่มต้นด้วย "[IADV]" และควรจะได้รับการจดทะเบียนทันทีหลังจากเซ็นเซอร์เวลาในด้านบนของรายการ
คุณสมบัติอื่น ๆ / พารามิเตอร์จะถูกเพิ่มในรุ่นต่อไป หากคุณมีความเห็นและ / หรือข้อเสนอแนะโปรดเพียงแค่แจ้งให้เราทราบ